| Crimpers |
> |
For insulated terminals and connectors |
|
|
| For insulated terminals and connectors |
 |
Leaves a crimp mark on the terminal which allows the die which was
used to be identified. |
|
|
| |
| ● |
The handle's adjustable opening width allows the tool to be
used while in small width condition. |
|
| Sizes |
0.3 / 0.5 / 1.25 / 2 |
| Weight |
350 g |
|
|
| |
 |
|
 |
|
|
Nominal
sizes |
Connector
manufacturer |
Compatible wire sizes (reference) |
Crimp
marking |
| AWG# |
mm2 |
| 1 |
0.5* |
JST Fuji Terminal Industry |
24 to 22 |
0.2 to 0.3 |
● |
| 2 |
0.3 / 0.5* |
Common to all
manufacturers |
24 to 20 |
0.2 to 0.5 |
●● |
| 3 |
1.25 |
20 to 16 |
0.5 to 1.65 |
1 |
| 4 |
2 |
16 to 14 |
1.04 to 2.63 |
2 |
|
|
| * |
For JST and Fuji Terminal Industry brand "noted terminals" with a nominal size of 0.5, and a wire size of 0.2 to 0.3 mm2, the appropriate die must be selected according to the wire type. |
|
 Warning |
●The handle cover is not insulated. Do not use where electrical currents exist. |
|
|
