HOZAN C-448 HEAD CUP PRESS

The C-448 is new tool for head-cup press, easy & safety maintenance.
The upper piece consist of the handle, shaft, and upper step-ring and lower step-ring piece. So you can easy and quickly work surely. If you turn the handle counter clockwise too much, C-448's handle stays at the top, it will not come off.
It has integrated bearing type.
You can work with long head-tube over 300mm using C-449 extension.

OAL	275mm
Applicable Weight size	400g

Caution

Don't work with such
head-set as a pre-installed bearing type.

Parts

C-448-1 BEARING

Replacement parts for C-448 and C-438.

C-448-4 ADAPTER SET

Using C-448-4 enable present C-448 to comply with headset such as ChrisKing, Zerostack, Onepointfive and Headshok. Still features easy operatability of C-448 because adapters are instantly stops by gasket inside.

Applicable size	1", 1-1/8", 1.5", 1.5"(1-1/8" conversion)
Outer diameter size	50mmφ(1"), 52mmφ(1-1/8"), 65mmφ(1.5")

C-449 EXTENSION

For long head-tube (220 to 350mm)

Weight

300g