K-280
MILLING MACHINE 
Compact milling & Drilling machine
■Accessories: Drill chuck, clamp (blades are sold separately)
| Rotation speed | 1200 to 6000 rpm |
|---|---|
| Spindle axial play | 0.05 mm（not including chuck） |
| Chucking dia. | For end-milling dedicated 6 mmφ* For drilling 1.0 mm to 10.0 mmφ |
| Rated voltage | 39V AC （with accessory 100V AC dedicated transformer） |
| Power consumption | 200 W |
| Rated time | 30 minutes |
| External dimensions | 350（W） × 505（H） × 420（D）mm （base）200（W） × 200（D）mm |
| Sliding | Base right / left 140 mm Front / back 110 mm （front 70 mm back 40 mm） Drill stand up / down 65 mm |
| Weight | 5.9 kg（drill stand）+3.7 kg（table） +1.9 kg（motor）+2.5 kg（transformer） Total weight: approx. 14 kg |
■Power cable: 1.7 m (from plug to transformer)
* Blades with diameters exceeding 6 mm cannot be used.
- Note
- Continuous operation which exceeds rated time. can cause a motor
- failure, etc.
- Even on & off at 1 to 2 minute intervals is considered continuous.
Warning- ●Do not wear gloves when working with this product.
- ●Always wear safety glasses when working with these tools.
