PRODUCTS Cutters & Pliers | [HOZAN] HOZAN CO., LTD.

PRECISION DIAGONAL CUTTERS & PRECISION PLIERS

: N-55; PRECISION DIAGONAL CUTTER

: N-57; PRECISION DIAGONAL CUTTER

: N-58; PRECISION DIAGONAL CUTTER

: P-51; PRECISION PLIERS

MINIATURE CUTTERS / PLASTIC CUTTERS / CUTTING TWEEZERS / STANDARD CUTTERS

: N-40; DIAGONAL CUTTER

: N-45; PLASTIC CUTTER

: N-31; MINIATURE DIAGONAL CUTTER

: N-34; MINIATURE DIAGONAL CUTTER

: N-32; MINIATURE DIAGONAL CUTTER

: N-35; MINIATURE DIAGONAL CUTTER

: N-25; PLASTIC CUTTER

: N-36; MINIATURE END CUTTER

: N-33; MINIATURE END CUTTER

: N-23; DIAGONAL CUTTER

: N-9; DIAGONAL CUTTER WITH STRIPPER

: N-12; DIAGONAL CUTTER

: N-4; DIAGONAL CUTTER

: N-5; DIAGONAL CUTTER WITH STRIPPER

SCISSORS / WIRE CUTTERS

: N-838; SNIPS

: N-841; SNIPS

: N-839; SNIPS

: N-18; CABLE CUTTERS

: N-16; WIRE CUTTER

MINIATURE PLIERS / LINEMAN'S PLIERS

: P-40; PLIERS

: P-32; MINIATURE FLAT NOSE PLIERS

: P-33; MINIATURE PLIERS

: P-35; MINIATURE LONG NOSE PLIERS

: P-36; MINIATURE LONG NOSE PLIERS

: P-34; MINIATURE FLAT NOSE PLIERS

: P-37; MINIATURE LONG NOSE PLIERS

: P-39; MINIATURE ROUND NOSE PLIERS

: P-14; LONG NOSE PLIERS WITH SIDE CUTTER

: P-15; LONG NOSE PLIERS WITH SIDE CUTTER

: P-22; LONG NOSE PLIERS WITH SIDE CUTTER

: P-16; FLAT NOSE PLIERS

: P-12; BENT NOSE PLIERS

: P-59-175; LINEMAN'S PLIERS

: P-57; LINEMAN'S PLIERS

: P-43; LINEMAN'S PLIERS

STANDARD PLIERS / SLIP JOINT PLIERS / WATER PUMP PLIERS

: P-230; PLASTIC TIP SLIP JOINT PLIERS

: P-231; PLASTIC TIP SLIP JOINT PLIERS

: P-232; PLASTIC TIP WATER PUMP PLIERS

: P-221; CHAIN PLIERS

: P-220; CHAIN PLIERS

: P-211Z; SLIP JOINT PLIERS

: P-244; WATER PUMP PLIERS

: P-245; WATER PUMP PLIERS

SCREWDRIVERS

: D-530 to D-555; PHILLIPS SCREWDRIVER

: D-630 to D-655; SLOTTED SCREWDRIVER

: D-331 / D-332; ELECTRICIAN'S SLOTTED SCREWDRIVER /
ELECTRICIAN'S PHILLIPS SCREWDRIVER

: D-52 to D-58; REVERSIBLE SCREWDRIVER

: D-44; REVERSIBLE SCREWDRIVER SET

: D-59; REVERSIBLE STUBBY SCREWDRIVER

: D-68 / D-69; STUBBY SCREWDRIVER

: D-963; IMPACT SCREWDRIVER

: D-745; LED VOLTAGE CHECKER

: D-13; VALVE CORE SCREWDRIVER

Guideline for screwdriver and suitable screws

Screw nominal size		M2	（M2.2）	*M2.3	M2.5	*M2.6	M3	（M3.5）	M4	（M4.5）	M5	M6	M8
Pitch		0.4	0.45	0.4	0.45	0.45	0.5	0.6	0.7	0.75	0.8	1	1.25
Cross-recess No.		No.1					No.2					No.3
⊖ Thread groove width mm	Standard dimensions	0.6			0.8			1			1.2		1.6
⊖ Thread groove width mm	Tolerance	＋0.15 −0									＋0.2 −0

*Asterisks denote screws which are outside the ISO scope.

PRECISION SCREWDRIVER

: D-912; ESD PRECISION SCREWDRIVER SET

: D-20; PRECISION SCREWDRIVER SET

: D-66 / D-67; MICRO SCREWDRIVER

: D-16; ALIGNMENT TOOL KIT

CERAMIC ALIGNMENT TOOL

: D-17; CERAMIC ALIGNMENT TOOL SET

: D-280; CERAMIC ALIGNMENT TOOL

: D-281; CERAMIC ALIGNMENT TOOL

: D-29-100; ALIGNMENT TOOL

WRENCHES

Socket wrench

Hex wrench

Ballpoint L-wrench

Torx wrench

Torx wrench（tamper-proof ^*1）

Spammnners

*¹ With regard to screws, the term "tamper-proof" refers to the torque screw specification which has a projection in the center of the screw hole to prevent general-type torque screwdrivers from being inserted. (torque screws)