H-600
SOLDERING IRON WITH BOOSTER
H-600 
H-600-230 
* The heater current and heat volume increase only when the boost function is ON.
* Do not press the boost switch continuously for more than 30 seconds.
■Power cord：1.5 m
| Rated voltage / frequency | 100 V 50 / 60 Hz（H-600） 230 V 50 / 60 Hz（H-600-230） |
|---|---|
| Power consumption | 19 W（130 W with boost） |
| Max. temperature | 410 ℃ |
| Insulation resistance | 200 MΩ（when stabilized without boost） |
| Standard tip | H-602 |
| OAL | 205 mm（not including the cord） |
| Weight | 160 g（not including the cord） |
