HOZAN Logo

K-21
DESK DRILL PRESS

●With adjustable cutting depth (max. 30 mm)

Spindle rotation Speed 2100 / 4500 / 6200 rpm
(adjustable pulley & belt configuration)
Drilling capacity For iron and non-ferrous 6.0 mmφ
Spindle axial play 0.04 mm(not including chuck)
Chucking dia. 0.8 to 6.0 mmφ
Rated voltage / frequency 100V AC 50 / 60 Hz
Power consumption 80 W
Rated time 15 minutes
External dimensions 120(W) × 350(H) × 225(D)mm
Weight 4 kg

■Power cable:2 m

Note
Continuous operation which exceeds 30 min. can cause a motor
failure, etc.
Even on & off at 1 to 2 minute intervals is considered continuous.
WarningWarning
●Do not wear gloves when working with this product.
●Always wear safety glasses when working with these tools.

Manual

■Replacement part

K-21-14
BELT

■For K-21

■Optional items

K-21-1
COLLET CHUCK

A collet chuck can be mounted on the K-21 to suppress axial play to a 0.04 mm.

* Cannot be used on the K-16.

■Compatible drills::1.0 / 1.5 / 2.0 / 2.4 / 3.0mmφ
(Collets are dedicated to each size.)

■For K-21

Manual